Cisco 7975G Administration Manual page 135

Chapter 6 Customizing the Cisco Unified IP Phone
Table 6-1
Field
Display Idle
Timeout
Display On If
Incoming Call
OL-12642-01
Display On and Off Configuration Fields (continued)
Description
Length of time that the phone is idle before the display
turns off. Applies only when the display was off as
scheduled and was turned on by an end-user (by pressing a
button on the phone, touching the touchscreen, or lifting
the handset).
Enter the value in this field in the format hours:minutes.
For example, to turn the display off when the phone is idle
for 1 hour and 30 minutes after an end-user turns the
display on, enter 1:30.
The default value is 0:30.
Disable/enable automatic illumination of the LCD screen
when a call is received.
Default: Disabled
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
Automatically Disabling the Cisco Unified IP Phone Touchscreen
6-9