Cisco 7975G Administration Manual page 77

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-2 Network Configuration Menu Options (continued)
Option Description
PC Port Speed and duplex of the access port (labeled
Configuration 10/100/1000 PC). Valid values:
•
•
•
•
•
•
If the phone is connected to a switch,
configure the port on the switch to the same
speed/duplex as the phone, or configure
both to auto-negotiate.
If you change the setting of this option, you
should change the SW Port Configuration
option to the same setting. This ensures that
the PC receives the full benefits of the
network operating speed.
PC VLAN Allows the phone to interoperate with 3rd
party switches that do not support a voice
VLAN. The Admin VLAN ID option must
be set before you can change this option.
Related Topics
•
•
•
•
•
OL-12642-01
Auto Negotiate
10 Half—10-BaseT/half duplex
10 Full—10-BaseT/full duplex
100 Half—100-BaseT/half duplex
100 Full—100-BaseT/full duplex
1000 Full—1000-BaseT/full duplex
Displaying a Configuration Menu, page 4-2
Unlocking and Locking Options, page 4-3
Editing Values, page 4-3
Overview of Options Configurable from a Phone, page 4-4
Device Configuration Menu, page 4-12
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 6.0
To Change
Unlock network configuration
1.
options.
Scroll to the PC Port
2.
Configuration option and then
press the Edit softkey.
3. Scroll to the setting that you
want and then press the Select
softkey.
Press the Save softkey.
4.
Unlock network configuration
1.
options.
Make sure the Admin VLAN
2.
ID option is set.
Scroll to the PC VLAN
3.
option, press the Edit softkey,
and then enter a new PC
VLAN setting.
4. Press the Validate softkey and
then press the Save softkey.
Network Configuration Menu
4-11