Scanner Commands For Cisco 7926G - Cisco 7925G Deployment Manual

Scanner Commands for Cisco 7926G

If wanting to use a barcode symbology type that is not included in either the Basic or Extended symbology groups, then a
custom scanner command must be configured for the Cisco Unified Wireless IP Phone 7926G within the product specific
configuration of Cisco Unified Communications Manager.
Below is a table listing which barcode symbology types are included in the Basic and Extended symbology groups as well as
the GID/FID values to be used with a scanner command.
Use the following command syntax to configure a scanner command.
Enable: 41<GID/FID>01
Disable: 41<GID/FID>00
Mixed: 41<GID1/FID1>01<GID2/FID2>00...
Barcode Symbology
UPC-A
UPC-E
UPC-E1
EAN-8
EAN-13
UPC/EAN Add-On 2
UPC/EAN Add-On 5
GS1 Databar Omni-Directional
GS1 Databar Limited
GS1 Databar Expanded
GS1 Composite CC-A/CC-B
GS1 Composite CC-C
Code 93/93i
Code 39
Code 128
ISBT-128
UCC/EAN-128
Interleaved 2 of 5
Matrix 2 of 5
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
Basic Extended
Y Y
Y Y
Y Y
Y
Y
Y
Y
Y
Y Y
Y Y
Y Y
Y
Y
ISCP
GID/FID
4B40
4B41
4B4C
4B42
4B43
4B45
4B46
4F40
4F41
4F42
5640
5641
4140
4240
4340
4341
4342
4440
4540
59