Cisco 7926G Barcode Status Messages; Phone Logs; Trace Settings - Cisco 7925G Deployment Manual

Cisco 7926G Barcode Status Messages

Status messages on the Cisco Unified Wireless IP Phone 7926G provide information in regards to barcode scanner firmware
installation, Java MIDP Add On Module (AOM) installation, and barcode scanner symbology group configuration events for
the Cisco Unified Wireless Phone 7926G.
To view the status messages navigate to Settings > Status > Status Messages.
The barcode scanner firmware for the Cisco Unified Wireless IP Phone 7926G is included in the signed COP and ZIP files
(scanner firmware is not included in the TAR file).

Phone Logs

Phone logs for troubleshooting purposes can be obtained from the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and
7926G web interface.

Trace Settings

Browse to the web interface (http://x.x.x.x) of the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, or 7926G then select
Trace Settings to enable debugging.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
138