7926G Barcode Scanner - Cisco 7925G Deployment Manual

Class I - A location where a quantity of flammable gas or vapor, sufficient to produce an explosive or ignitable
•
mixture, may be present in the air.
Class II - A location made hazardous by the presence of combustible or electrically conductive dust, including Groups
•
E (metal dust), F (coal dust) and G (grain dust).
Class III - A location made hazardous by the presence of easily ignitable fibers in the air, but not likely in sufficient
•
quantities to produce ignitable mixtures.
Division 1 - A location where a classified hazard is likely to exist.
•
Division 2 - A location where a classified hazard does not normally exist but is possible under abnormal conditions.
•
Internationally (and more recently in North America, for Class I hazardous locations), areas where explosive gas atmospheres
are likely to be present are divided into three IEC-defined Zones:
Zone 0 - An area in which an explosive gas atmosphere is continuously present or present for long periods.
•
Zone 1 - An area in which an explosive gas atmosphere is likely to occur in normal operation.
•
Zone 2 - An area in which an explosive gas atmosphere does not normally exist.
•

7926G Barcode Scanner

The Cisco Unified Wireless IP Phone 7926G leverages the Cisco Unified Wireless IP Phone 7925G design, but with the
addition of a 2D barcode scanner.
A Java MIDlet application is required to invoke the scanner.
Java MIDP support is included in the initial 1.4(1)SR1 release for the Cisco Unified Wireless IP Phone 7926G.
The Java MIDlet for the Cisco Unified Wireless IP Phone 7926G will be a custom built application for a customer, where
lookups can be queried against their own databases.
The Cisco Unified Wireless IP Phone 7926G supports both the Basic and Extended barcode symbology groups.
Basic – Code 39, Code 128, DataMatrix, EAN-13, UCC/EAN128, UPC, PDF 417
•
Extended – Code 39, Code 128, DataMatrix, EAN-13, UCC/EAN128, UPC, PDF 417, Aztec, Codabar, Code 11, Code
•
93/93i, EAN Add-On 2, GS1 Databar, Interleave 2 of 5, Matrix 2 of 5, Maxicode, Micro PDF 417, Plessey, QRCode,
Standard 2 of 5, Telepen
See the Product Specific Configuration Options
For more info on creating Java MIDlet applications for the Cisco Unified Wireless IP Phone 7926G, refer to the following
URL.
http://developer.cisco.com/web/jmapi/home
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
section for information on how to configure barcode options.
15