Cisco 7925G Deployment Manual page 91

feature is only supported with Network Profile 1. If multiple network profiles are enabled and Prompt Mode is
enabled, then the user would have to dismiss the login in order to switch to other enabled network profiles.
Below are the available security modes supported and the key management and encryption types can be used for each
•
mode.
Security Mode
Open
Open+WEP
Shared+WEP
LEAP
EAP-FAST
EAP-TLS
PEAP
AKM
Open with WEP and Shared Key security modes require that the static WEP settings be entered.
•
Key Style
ASCII
ASCII
HEX
HEX
The AKM security mode is an auto authentication mode that can use either LEAP for 802.1x authentication or WPA
•
Pre-Shared Key.
If using 802.11i (Pre-Shared key), enter the ASCII or hexadecimal formatted key.
•
Pre-Shared Key requires that a passphrase be entered in ASCII or hexadecimal format.
Key Style
ASCII
HEX
AKM mode requires a key management type to be enabled on the Access Point.
•
For 802.1x authentication methods, WPA, WPA2 or CCKM is required.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
Key Management
N/A
Static
Static
802.1x, WPA, WPA2
802.1x, WPA, WPA2
802.1x, WPA, WPA2
802.1x, WPA, WPA2
802.1x, WPA, WPA2,
WPA-PSK, WPA2-PSK
Key Size Characters
40/64 5
104/128 13
40/64 10 (0-9, A-F)
104/128 26 (0-9, A-F)
Characters
8-63
64 (0-9,A-F)
Encryption
N/A
WEP (40/64 or 104/128 bit)
WEP (40/64 or 104/128 bit)
TKIP, AES, WEP (40/64 or 104/128 bit)
TKIP, AES, WEP (40/64 or 104/128 bit)
TKIP, AES, WEP (40/64 or 104/128 bit)
TKIP, AES, WEP (40/64 or 104/128 bit)
TKIP, AES, WEP (40/64 or 104/128 bit)
91