Cisco 7925G Deployment Manual page 57

Note: If configuring the Admin Password in Cisco Unified Communications Manager versions 5.1, 6.0, 6.1, 7.0, 7.1, 8.0, 8.5,
8.6 or later and web access is set to Full, then it is recommended to enable TFTP encryption via the device security profile.
As of the 1.3(3) release, if settings access is set to Disabled, then the current ring volume will be locked in and will no longer
be configurable.
To configure product specific configuration options for the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G
with Cisco Unified Communications Manager Express, create an ephone template with the necessary options.
service phone <module> <value>
Field Name
Disable Speakerphone
Gratuitous ARP
Settings Access
Web Access
Locked Profiles
Load Server
Admin Password
Special Numbers
Application URL
"Send" Key Action
Phone Book Web Access
Unlock-Settings Sequence
Application Button Activation
Timer
Application Button Priority
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
Module
disableSpeaker
garp
settingsAccess
webAccess
WlanProfile<1-4>
loadServer
adminPassword
specialNumbers
PushToTalkURL
sendKeyAction
phoneBookWebAccess
unlockSettingsSequence
appButtonTimer
appButtonPriority
Value
false = Enabled; true = Disabled
0 = Enabled; 1 = Disabled
0 = Disabled; 1 = Enabled; 2 = Restricted
0 = Full; 1 = Disabled; 2 = ReadOnly
0 = Unlocked; 1 = Locked, 2 = Restricted
x.x.x.x
(e.g. Cisco)
(e.g. 411,911)
http://x.x.x.x
0 = Onhook Dialing; 1 = Offhook Dialing
0 = Deny All; 1 = Allow Admin
0 = Disabled; 1 = Enabled
0 = Disabled; <1-5> = <1-5> seconds
0 = Low; 1 = Medium; 2 = High
57