Ensure Client Load Balancing and Client Band Select are disabled for the voice SSID.
For the Cisco Autonomous Access Point, ensure that the SSID is configured for open + eap as and network-eap when using
802.1x authentication.
As of the 1.3(2) release, the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G utilizes open + eap when doing
802.1x authentication, but utilized network-eap in previous releases.
dot11 ssid voice
vlan 21
authentication
open eap
authentication
network-eap
authentication key-management wpa cckm
admit-traffic
If the Cisco Autonomous Access Point is registered to a WDS (Wireless Domain Services) server, ensure both leap and eap
types of authentication are enabled in the WDS configuration.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
eap_methods
eap_methods
65