Trace Levels; Trace Logs - Cisco 7925G Deployment Manual

Call Control
Network Services
Security Subsystem
User Interface
Audio System
System
Java
Bluetooth

Trace Levels

Various levels of tracing are available, that can provide different levels of messaging.
Emergency, Alert, Critical, Error, Warning, Notice, Info, Debug
Note: All trace modules are set to Error level by default.
Voice quality can potentially be impacted if higher trace levels are configured or if Preserve Logs is enabled, which will write
the logs to flash memory.
The trace level will reset to Error level by default unless configured to preserve the trace levels where Reset Trace Settings
upon Reboot is set to No.

Trace Logs

To download the phone logs, browse to the web interface (http://x.x.x.x) of the Cisco Unified Wireless IP Phone 7925G,
7925G-EX, or 7926G then select Trace Logs.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
Cisco Unified Communications Manager messaging (SCCP)
DHCP, TFTP, CDP, WWW, Syslog
Application level security
Keypad, softkeys, MMI
RTP, SRTP, RTCP, DSP
Event Manager
Java MIDP
Bluetooth
140