Vca - Bosch NEI-Series User Manual

Dinion IP Infrared Imager
Select the On option to automatically re-establish a connection
to one of the previously specified IP addresses after each
reboot, after a connection breakdown or after a network failure.
NOTICE!
In the default setting, Stream 2 is transmitted for automatic
connections. Bear this fact in mind when assigning the profile
(see Section 9.3.8 Encoder Profile, page 61).
9.5.2

VCA

The camera contains an integrated video content analysis
(VCA), which can detect and analyze changes in the signal on
the basis of image processing. Such changes can be due to
movements in the camera's field of view.
You can select various VCA configurations and adapt these to
your application as required. The Silent MOTION+ configuration
is active by default. In this configuration, metadata is created to
facilitate searches of recordings; however, no alarm is
triggered.
1.
2.
VCA Profiles
You can configure two profiles with different VCA
configurations. You can save profiles on your computer's hard
drive and load saved profiles from there. This can be useful if
you want to test a number of different configurations. Save a
functioning configuration and test new settings. You can use
the saved configuration to restore the original settings at any
time.
1.
2.
3.
Bosch Security Systems, Inc.
Select a VCA configuration and make the required settings.
If necessary, click the Default button to return all settings
to their default values.
Select a VCA profile and enter the required settings.
If necessary, click the Default button to return all settings
to their default values.
Click the Save... button to save the profile settings to
another file. A new window is opened, in which you can
specify where you want to save the file and what name you
want to save it under.
Configuration via IP, Advanced Mode | en
User Manual F.01U.263.416 | 3.1 | 2012.09
77