Bosch NEI-Series User Manual page 41

Dinion IP Infrared Imager
configuration screens. You can change the settings by entering
new values or by selecting a predefined value from a list field.
Starting Configuration

Navigation
1.
2.
There are two options for configuring the unit or checking the
current settings:
–
–
All parameter groups are described in this chapter in the order
in which they are listed in the configuration menu, from the top
of the screen to the bottom.
CAUTION!
The settings in the advanced mode should only be processed or
modified by expert users or system support personnel.
All settings are backed up in the memory so they are not lost
even if the power fails.
Making Changes
Each configuration screen shows the current settings. You can
change the settings by entering new values or by selecting a
predefined value from a list field.
Bosch Security Systems, Inc.
Click the SETTINGS link in the upper section of the
window. The web browser opens a new page with the
configuration menu.
Click one of the menu items in the left window margin. The
corresponding submenu appears.
Click one of the entries in the submenu. The web browser
opens the corresponding page.
Basic Mode, in which the most important parameters are
arranged in six groups that allow users to change the basic
settings with a few entries and then to operate the camera.
(See Section 8 Configuration via IP, Basic Mode, page 43.)
Advanced Mode, in which all camera parameters are
available, is recommended only for expert users or system
support personnel. Settings that affect the fundamental
functionality of the unit (such as firmware updates) can
only be altered in this mode. (See Section 9 Configuration
via IP, Advanced Mode, page 48.)
Operation via the Browser | en
User Manual F.01U.263.416 | 3.1 | 2012.09
41