Table of Contents
Advertisement
DINION 3100i IR
5.6.2
Video Content Analysis (VCA)
This device has an integrated video analytics suite of AI-driven software, which detects and
analyzes changes in the picture using image processing algorithms. Such changes can be
due to movements in the device's field of view. Detection of movement can be used to
trigger an alarm and to transmit metadata.
Various VCA configurations can be selected and adapted to your application, as required.
Configure the VCA setting in the Bosch Configuration Manager.
5.6.3
Alarm Email
Alarm states can be documented by e-mail. The camera automatically sends an e‑mail to a
user-defined e‑mail address. This makes it possible to notify a recipient who does not have a
video receiver.
Send alarm e-mail
Select On for the device to automatically send an alarm e‑mail in the event of an alarm.
Mail server IP address
Enter the IP address of a mail server that operates on the SMTP standard (Simple Mail
Transfer Protocol). Outgoing e‑mails are sent to the mail server via the address entered.
Otherwise, leave the box blank (0.0.0.0).
SMTP port
Select the appropriate SMTP port.
SMTP user name
Enter a registered user name for the chosen mail server.
SMTP password
Enter the required password for the registered user name.
Format
Select the data format of the alarm message.
–
–
When a mobile phone is used as the receiver, make sure to activate the e‑mail or SMS
function, depending on the format, so that these messages can be received. Obtain
information on operating your mobile phone from your mobile phone provider.
Image size
Select the size of the JPEG images that are to be sent from the camera.
Attach JPEG from camera
To send a JPEG image from a particular video channel, check the appropriate box.
VCA overlays
Select the VCA overlays check box, to place the outline of the object that triggered an
alarm into the camera image sent as snapshot via e-mail.
Destination address
Enter the e‑mail address for alarm e‑mails here. The maximum address length is 49
characters.
Sender address
Enter a unique name for the e‑mail sender, for example, the location of the device. This
makes it easier to identify the origin of the e‑mail.
Test e-mail
Click Send Now to test the e‑mail function. An alarm e-mail is immediately created and sent.
Click Set to apply the changes.
Bosch Security Systems B.V.
Standard (with JPEG): e‑mail with JPEG image file attachment.
SMS: e‑mail in SMS format to an e‑mail‑to‑SMS gateway without an image attachment.
User manual
Configuration | en
43
2024-02 | V01 | DOC
Advertisement
Table of Contents
