Bosch NEI-Series User Manual page 73

Dinion IP Infrared Imager
1.
2.
3.
4.
5.
6.
Holidays
You can define holidays that are not in the standard weekly
schedule on which recordings are to apply. This allows you to
apply a schedule for Sundays to other days with dates that fall
on varying weekdays.
1.
2.
3.
4.
5.
Deleting Holidays
You can delete holidays you have defined yourself at any time.
1.
2.
3.
4.
Time periods
You can change the names of the recording profiles.
1.
2.
Bosch Security Systems, Inc.
Click the profile you want to link in the Time periods field.
Click in a field in the table, hold down the mouse button
and drag the cursor over all the periods to be assigned to
the selected profile.
Use the right mouse button to deselect any of the intervals.
Click the Select All button to link all time intervals to the
selected profile.
Click the Clear All button to deselect all of the intervals.
When you finish, click the Set button to save the settings in
the unit.
Click the Holidays tab. Any days that have already been
selected will be shown in the table.
Click the Add button. A new window will open.
Select the desired date from the calendar. You can select
several consecutive calendar days by holding down the
mouse button. These will later be displayed as a single
entry in the table.
Click OK to accept the selection. The window will close.
Assign the individual holidays to the recording profiles, as
described above.
Click the Delete button. A new window will open.
Click the date that you want to delete.
Click OK. The item will be deleted from the table and the
window will close.
The process must be repeated for deleting additional days.
Click a profile and then the Rename button.
Enter your chosen name and then click the Rename button
again.
Configuration via IP, Advanced Mode | en
User Manual F.01U.263.416 | 3.1 | 2012.09
73