Livepage Functions - Bosch NEI-Series User Manual

54 en | Configuration via IP, Advanced Mode
NOTICE!
If you want to use the original graphics again, simply delete the
entries in the Company logo and Device logo fields.
JPEG interval
You can specify the interval at which the individual images
should be generated for the M-JPEG image on the LIVEPAGE.
9.2.2

LIVEPAGE Functions

On this page, you can adapt theLIVEPAGE functions to your
requirements. You can select from a variety of different options
for displaying information and controls.
1.
2.
Show relay outputs
Relay outputs appear as icons, along with their assigned names,
next to the video image. If the relay is switched, the icon
changes color.
Show VCA trajectories
When video content analysis (VCA) is activated, check this item
to show additional information that traces the trajectories
(motion lines) of objects) in the live video image (see
Section 9.5.2 VCA, page 77).
Show VCA metadata
When video content analysis (VCA) is activated, additional
information is displayed in the live video stream. For example,
in Motion+ mode, the sensor areas for motion detection are
marked.
Show event log
The event messages are displayed along with the date and time
in a field next to the video image.
F.01U.263.416 | 3.1 | 2012.09
Check the box for the items that are to be made available
on the LIVEPAGE. The selected items are indicated by a
check mark.
Check whether the required functions are available on the
LIVEPAGE.
User Manual
Dinion IP Infrared Imager
Bosch Security Systems, Inc.