Multicast - Bosch NEI-Series User Manual

92 en | Configuration via IP, Advanced Mode
Password
Enter the password that is stored in the RADIUS server.
RTSP port
If necessary, select a different port for the exchange of the
RTSP data from the list. The standard RTSP port is 554. Select
Off to deactivate the RTSP function.
UPnP
You can activate the universal plug and play function (UPnP).
When activated the camera reacts on requests from the
network and will be registered automatically as a new network
device on the inquiring computers. The access to the camera is
then possible via the Windows file explorer, and without
knowledge of the camera's IP address.
NOTICE!
In order to use the UPnP function on a computer with Windows
XP or Windows Vista, the Universal Plug and Play Device Host
and the SSDP Discovery services must be activated.
This function should not be used in large installations due to
the large number of registration notifications.
TCP metadata input
The device can receive data from an external TCP sender, for
example an ATM or POS device, and store it as metadata.
Select the port for TCP communication. Select Off to deactivate
the TCP metadata function.
Sender IP address
Enter the IP address of the TCP metadata sender here.
9.7.3

Multicast

In addition to a 1:1 connection between an encoder and a
single receiver (unicast), the camera can enable multiple
receivers to receive the video signal from an encoder
simultaneously. The device either duplicates the data stream
itself and then distributes it to multiple receivers (Multi-
unicast) or it sends a single data stream to the network, where
the data stream is simultaneously distributed to multiple
receivers in a defined group (Multicast). You can enter a
F.01U.263.416 | 3.1 | 2012.09 User Manual
Dinion IP Infrared Imager
Bosch Security Systems, Inc.