Bosch NEI-Series User Manual page 21

Dinion IP Infrared Imager
WARNING!
Install external interconnecting cables in accordance with NEC,
ANSI/NFPA70 (for US application) and Canadian Electrical
Code, Part I, CSA C22.1 (for CAN application), and in
accordance with local country codes for all other countries.
CSA Certified / UL Listed CLASS 2 power adapters must be
used in order to comply with electrical safety standards.
Branch circuit protection incorporating a 20 A, 2-pole Listed
Circuit Breaker or Branch Rated Fuses are required as part of
the building installation. A readily-accessible 2-pole disconnect
device with a contact separation of at least 3 mm must be
incorporated.
4.
CAUTION!
Select a rigid mounting location to prevent excessive vibration
to the camera.
Bosch Security Systems, Inc.
Select the appropriate mounting kit to use, depending on
the location of the VEI-30 / NEI-30 Series camera. The
camera is intended to be mounted securely to a wall using
the mounting holes in the junction box.
User Manual
Planning | en
F.01U.263.416 | 3.1 | 2012.09
21