Recording Profiles - Bosch NEI-Series User Manual

Dinion IP Infrared Imager
CAUTION!
If older recordings are not allowed to be overwritten when the
available memory capacity has been used, the recording in
question will be stopped. You can specify limitations for
overwriting old recordings by configuring the retention time
(see Section 9.4.3 Retention Time, page 72).
Formatting Storage Media
You can delete all recordings on a storage medium at any time.
CAUTION!
Check the recordings before deleting and back up important
sequences on the computer's hard drive.
1.
2.
3.
4.
Deactivating Storage Media
You can deactivate any storage medium from the Managed
storage media list. It is then no longer used for recordings.
1.
2.
9.4.2

Recording Profiles

You can define up to ten different recording profiles. You will
then use these recording profiles in the recording scheduler,
where they are linked with the individual days and times (see
Section 9.4.4 Recording Scheduler, page 72).
Bosch Security Systems, Inc.
overwritten once the available memory capacity has been
used. Recording 1 corresponds to Stream 1, Recording 2
corresponds to Stream 2.
Click a storage medium in the Managed storage media list
to select it.
Click the Edit button below the list. A new window will
open.
Click the Formatting button to delete all recordings in the
storage medium.
Click OK to close the window.
Click a storage medium in the Managed storage media list
to select it.
Click the Remove button below the list. The storage
medium is deactivated and removed from the list.
Configuration via IP, Advanced Mode | en
User Manual F.01U.263.416 | 3.1 | 2012.09
69