Recording Video Sequences; Settings - Bosch NEI-Series User Manual

40 en | Operation via the Browser
7.3.4

Recording Video Sequences

If your model is configured to record sections of the video
sequences displayed on the LIVEPAGE, you will see the
following icon:
1.
2.
NOTICE!
You can play back saved video sequences using the Player from
Bosch Security Systems, which can be installed from the
product CD supplied.
Image Resolution
Sequences are saved at the resolution that has been preset in
the configuration for the encoder (see Section 8.4 Basic Mode:
Encoder, page 46).
Image Selection
You can view the image of the camera in different displays.

Triggering Relay
External units can be activated using the relay in the device (for
example, lights or door openers).

7.4

Settings

The SETTINGS page provides access to the configuration menu,
which contains all the unit's parameters arranged in groups.
You can view the current settings by opening one of the
F.01U.263.416 | 3.1 | 2012.09
Click the icon to start recording. A red dot in the icon
indicates that recording is in progress. The video is
recorded on the hard drive of your computer. The storage
location depends on the configuration of the camera.
Click the icon again to stop recording.
Click one of the tabs Stream 1, Stream 2, or M-JPEG
below the video image to toggle between the different
displays of the camera image.
To activate this, click the icon for the relay next to the
video image. The icon will be red when the relay is
activated.
User Manual
Dinion IP Infrared Imager
Bosch Security Systems, Inc.