Making Pan Adjustments; Making Tilt Adjustments; Bosch Security Systems, Inc - Bosch NEI-Series User Manual

32 en | Manual Camera Settings
Figure 6.3 Focus and Zoom screws on the inside of the access panel on
the rear of the camera housing
6.1.3

Making Pan Adjustments

1.
2.
3.
6.1.4

Making Tilt Adjustments

1.
2.
3.
4.
5.
Figure 6.4 Example orientation: Camera rotated 90 degrees left, pointing
up 44 degrees. From left: front view, side view, back view
F.01U.263.416 | 3.1 | 2012.09
Using the 4 mm hex key, loosen the bolts at the base of the
"u bracket" to make the necessary pan adjustments.
When loosened, adjust the camera to the desired pan
angle.
Tighten the bolt to secure in place.
Using the 2.5 mm hex key, unscrew the round caps (CCW)
where the bracket attaches to the camera housing to
expose the bolts for tilt adjustment.
Using the 4 mm hex key, loosen the bolts.
Make the necessary tilt adjustments.
Tighten the bolts to secure the camera in place.
Replace the round caps when you finish the adjustments.
User Manual
Dinion IP Infrared Imager

Bosch Security Systems, Inc.