Bosch NEI-Series User Manual page 52

52 en | Configuration via IP, Advanced Mode
Camera name stamping
This field sets the position of the camera name overlay. It can
be displayed at the Top, at the Bottom at a position of your
choice that you can specify using the Custom option, or it can
be set to Off for no overlay information.
1.
2.
3.
Time stamping
This field sets the position of the time overlay. It can be
displayed at the Top, at the Bottom, at a position of your choice
that you can then specify using the Custom option, or it can be
set to Off for no overlay information.
1.
2.
3.
Display milliseconds
If necessary, you can also display milliseconds. This information
can be useful for recorded video images; however, it does
increase the processor's computing time. You can select this
option only if the Time stamping function is activated. Select
Off if you do not need to display milliseconds.
Alarm mode stamping
Select On to display a text message overlay in the image in the
event of an alarm. It can be displayed at a position of your
choice that you can specify using the Custom option, or it can
be set to Off for no overlay information.
1.
2.
3.
F.01U.263.416 | 3.1 | 2012.09
Select the desired option from the list.
If you select the Custom option, additional fields appear
where you can specify the exact position (Position (XY)).
In the Position (XY) fields, enter the values for the desired
position.
Select the desired option from the list.
If you select the Custom option, additional fields appear
where you can specify the exact position (Position (XY)).
In the Position (XY) fields, enter the values for the desired
position.
Select the desired option from the list.
If you select the Custom option, additional fields appear
where you can specify the exact position (Position (XY)).
In the Position (XY) fields, enter the values for the desired
position.
User Manual
Dinion IP Infrared Imager
Bosch Security Systems, Inc.