Picture Settings: Iluminator - Bosch NEI-Series User Manual

Dinion IP Infrared Imager
Switch level
Set the video Switch level at which the camera switches to
monochrome operation (-15 to 0 to +15). A low (negative) value
means that the camera switches to? monochrome at a lower
light (lux) level. A high (positive) value means that the camera
switches to monochrome at a higher light (lux) level.
If you select Auto Photocell switching mode, the camera
automatically switches the filter depending on the ambient light
level. The switching level is programmable by adjusting the
switch level.
Priority
In Auto Video switching mode, set the camera priority:
–
–
The camera recognizes IR-illuminated scenes to prevent
unwanted switching to color mode.
IR contrast
There are two modes for IR contrast:
–
–
Color burst
Select On to activate color burst. Select Off to deactivate it.
9.3.5

Picture Settings: Iluminator

IR function
–
–
–
Bosch Security Systems, Inc.
Motion - The camera gives sharp images without motion
blur as long as the light level permits.
Color - The camera gives color pictures as long as the light
level permits.
Enhanced - The camera optimizes contrast in applications
with high IR illumination levels.
Normal - The camera optimizes contrast in mono
applications with visible light illumination.
On - The illuminator is always on, regardless of the level of
ambient light.
Off - The illuminator remains off, regardless of the level of
ambient light.
Auto - The camera switches the illuminator's cut-off filter
on and off depending on the Day/Night mode.
Configuration via IP, Advanced Mode | en
User Manual F.01U.263.416 | 3.1 | 2012.09
59