Basic Mode: Date/Time - Bosch NEI-Series User Manual

44 en | Configuration via IP, Basic Mode
Enter the password for the appropriate authorization level. The
maximum text length is 19 characters.
NOTICE!
Proper password protection is only guaranteed when all higher
authorization levels are also protected with a password. If a live
password is assigned, for example, you must also set a service
and a user password. When assigning passwords, you should
therefore always start from the highest authorization level,
service, and use different passwords.
Confirm password
In each case, enter the new password a second time to
eliminate typing mistakes.
NOTICE!
A new password is saved only when you click the Set button.
You should therefore click the Set button immediately after
entering and confirming a password.
8.2

Basic Mode: Date/Time

Device date/Device time/Device time zone
If there are multiple devices operating in your system or
network, it is important to synchronize their internal clocks. For
example, it is only possible to identify and correctly evaluate
simultaneous recordings when all units are operating on the
same time. If necessary, you can synchronize the unit with your
computer's system settings.

Time server IP address
The camera can receive the time signal from a time server using
various time server protocols, and then use it to set the internal
clock. The unit polls the time signal automatically once every
minute.

F.01U.263.416 | 3.1 | 2012.09
Click the Sync to PC button to copy your computer's
system time to the camera.
Enter the IP address of a time server here.
User Manual
Dinion IP Infrared Imager
Bosch Security Systems, Inc.