Table of Contents
Advertisement
AUTODOME IP starlight 5000i
If you select the Pattern "Auto," the camera adjusts to the brightness or darkness of the
background scene of the video. In other words, the color of the Privacy mask is the most
prevalent of the three (Black, White, or Gray) in the background scene that the Privacy mask
covers.
Enabled
Select this check box to draw the mask for the corresponding Privacy mask zone.
Clear this check box to erase the mask for an individual Privacy mask zone.
–
Note: You can disable masks individually by deselecting the check box Disable masks.
Mask enlargement
Select this check box to enlarge all masks automatically while the camera is in motion.
Zoom threshold
Click this check box to select the current zoom position at which the mask will appear as the
camera zooms in or be hidden as the camera zooms out.
6.11
Picture Settings
Current mode
Select one of the pre-programmed user modes, optimized with the best settings for a variety
of typical applications, that best defines the environment in which the camera is installed.
–
–
–
–
Customize the mode, if necessary, for the specific requirements of the site by selecting
different values for the fields below.
In this case, the name of the user mode changes to "Custom."
White Balance
Adjusts the color settings to maintain the quality of the white areas of the image.
Red Gain
The red gain adjustment offsets the factory white point alignment (reducing red introduces
more cyan).
Blue Gain
The blue gain adjustment offsets the factory white point alignment (reducing blue introduces
more yellow). It is only necessary to change the white point offset for special scene
conditions.
Sodium red level
Adjust the level of red for sodium vapor lighting with the slider from 0 to 255.
Sodium blue level
Adjust the level of blue for sodium vapor lighting with the slider from 0 to 255.
Note: The fields Sodium red level and Sodium blue level appear only when the value in the
field White balance is "Sodium lamp auto" or "Sodium lamp."
Saturation
The percentage of light or color in the video image. Values range from 60% to 200%; the
default is 110%.
Bosch Security Systems
To hide all privacy masks, click the check box Disable masks.
Motion: Optimized to minimize motion artifacts, such as when monitoring traffic or fast-
moving objects.
Low light: Optimized performance for scenes with low light level.
Indoor: Optimized for scenes with indoor lighting, and avoids the limitations imposed by
the sun or street lighting.
Vibrant: Provides enhanced contrast, color reproduction, and sharpness.
User Manual
Camera | en
33
2018.11 | 1.1 |
Advertisement
Table of Contents
