Picture Settings - Bosch MIC inteox 7100i User Manual

26 en | Camera
Copy mode to
Select the mode from the drop-down menu to which you wish to copy the active mode.
Note: To restore the default setting of all scene modes, you must click the Restore button in
the Camera > Installer Menu > System controller settings.
Restore mode defaults
Click Restore Mode Defaults to restore the factory default scene modes. Confirm your
decision.
6.4.1

Picture Settings

Color
White Balance
Adjusts the color settings to maintain the quality of the white areas of the image.
–
–
–
–
–
Red Gain
The red gain adjustment offsets the factory white point alignment (reducing red introduces
more cyan).
Blue Gain
The blue gain adjustment offsets the factory white point alignment (reducing blue introduces
more yellow). It is only necessary to change the white point offset for special scene
conditions.
Sodium red level
Adjust the level of red for sodium vapor lighting with the slider from 0 to 255.
Sodium blue level
Adjust the level of blue for sodium vapor lighting with the slider from 0 to 255.
Note: The fields Sodium red level and Sodium blue level appear only when the value in the
field White balance is "Sodium lamp auto" or "Sodium lamp."
Saturation
Select the percentage of light or color in the video image. The range of options is from 60% to
200%; the default is 100%.
Color hue
Select the degree of color in the video image. The range of options is from -18° to 18°; the
default is 0°.
Brightness
Adjust the brightness level with the slider. The default is 10.
Contrast
Adjust the contrast level with the slider. The default is 10.
Exposure and gain control
Gain control
Adjusts the automatic gain control (AGC).
–
2022-09 | 1.18 |
ATW: allows the camera to adjust color reproduction continuously.
AWB hold: places the ATW on hold and saves the color settings.
Extended ATW (default): allows the camera to adjust constantly for optimal color
reproduction.
Manual: Red and Blue gain can be set manually to a desired position.
Sodium lamp auto: Automatically adjusts for sodium vapor light to restore objects to
their original color.
AGC (default): Automatically adjusts the gain to the lowest possible value needed to
maintain a good picture.
User Manual
MIC inteox 7100i
Bosch Security Systems