Picture Settings - Bosch AUTODOME IP starlight 7000i Series User Manual

AUTODOME IP starlight 7000i
Restore mode defaults
Click Restore Mode Defaults to restore the factory default modes. Confirm you decision.
5.2.1

Picture Settings

5.2.1.1 Color
White Balance
Adjusts the color settings to maintain the quality of the white areas of the image.
–
–
–
–
–
–
Red Gain
The red gain adjustment offsets the factory white point alignment (reducing red introduces
more cyan).
Blue Gain
The blue gain adjustment offsets the factory white point alignment (reducing blue introduces
more yellow). It is only necessary to change the white point offset for special scene
conditions.
Sodium red level
Adjust the level of red for sodium vapor lighting with the slider from 0 to 255.
Sodium blue level
Adjust the level of blue for sodium vapor lighting with the slider from 0 to 255.
Note: The fields Sodium red level and Sodium blue level appear only when the value in the
field White balance is "Sodium lamp auto" or "Sodium lamp."
Saturation
Select the percentage of light or color in the video image. The range of options is from 60% to
200%; the default is 100%.
Color hue
Select the degree of color in the video image. The range of options is from -14° to 14°; the
default is 0°.
5.2.1.2 Exposure and gain control
Gain control
Adjusts the automatic gain control (AGC).
–
–
Fixed Gain
Use the slide to select the desired number for fixed gain. The default is 2.
To set the Maximum gain level, select Low, Medium or High from the drop-down box.
AE-response speed
Select the speed of the response of auto exposure. Options are Super slow, Slow, Medium
(default), Fast.
Shutter Mode
–
Bosch Security Systems
ATW: allows the camera to adjust color reproduction continuously.
Indoor: white balance tracking for indoor use.
Outdoor: white balance tracking for outdoor use.
AWB hold: places the ATW on hold and saves the color settings.
Extended ATW (default): allows the camera to adjust constantly for optimal color
reproduction.
Manual: Red and Blue gain can be set manually to a desired position.
AGC (default): Automatically adjusts the gain to the lowest possible value needed to
maintain a good picture.
Fixed: no enhancement. This setting disables the Max. Gain Level option.
Fixed: The shutter mode is fixed to a selectable shutter speed.
User Manual
Camera | en 25
2019-11-21 | v0.5 |