Configuring Tray Behavior - Xerox WorkCentre 3615 User Manual

11. Verify or set the paper size and type.
a. At the printer control panel, press the Machine Status button.
Touch Tools > Tray Management > Tray Settings.
b.
c. Touch the desired tray.
Note: When you select the bypass tray, the check box for Use Driver Settings for Print Job is set by
default. To change the setting, clear the check box.
d. Touch Size, then touch an option as needed.
Touch Type, then touch an option as needed.
e.

Configuring Tray Behavior

When an individual tray is set to Display Tray Prompt mode, the control panel prompts you to verify or
set the paper size and type.
The Tray Priority feature determines the order in which the printer selects the tray for a print job when
you have not specified one. Tray Priority also determines how the printer selects another tray when a
paper tray runs out in the middle of a job. Priority 1 indicates that the tray is set to the highest priority.
Tray Mode allows you to have the control panel or the print driver specify the bypass tray mode.
To set the Display Tray Prompt mode:
1. At the printer control panel, press the Machine Status button.
Touch Tools > Tray Management > Tray Settings.
2.
3. Touch the desired tray.
Select the Display Tray Prompt check box.
4.
Touch OK.
5.
To set the priority for a tray:
At the printer control panel, press the Machine Status button.
1.
2. Touch Tools > Tray Management > Tray Priority.
To specify the first priority, touch 1-First.
3.
4. On the 1-First screen, touch the desired tray, then touch OK.
5. To establish priority for any remaining trays, repeat the steps.
Note: As each priority is assigned to a tray, the menu advances to the next priority automatically.
When there are no trays left to prioritize, the menu returns to Tray Priority.
® ®
Xerox WorkCentre 3615 Black and White Multifunction Printer
Paper and Media
63
User Guide