Xerox WorkCentre 3615 User Manual page 56

Paper and Media
− For 2-sided printing, load letterhead and pre-printed face down with the top edge facing you.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to
jam.
5. Adjust the width guides until they touch the edges of the paper.
6. If the control panel prompts you, on the screen, verify the paper size and type.
7. To specify the settings on the printer control panel, for Use Driver Settings for Print Job, clear the
check box.
Touch Size, then, for a standard paper size, touch an option.
a.
b. Touch Type, then, for the paper type, touch an option.
Touch OK.
c.
8. Verify or set the paper size and type.
a. At the printer control panel, press the Machine Status button.
Touch Tools > Tray Management > Tray Settings.
b.
c. Touch the desired tray.
Note: When you select the bypass tray, the check box for Use Driver Settings for Print Job is set by
default. To change the setting, clear the check box.
d. Touch Size, then touch an option as needed.
Touch Type, then touch an option as needed.
e.
®
56 Xerox WorkCentre
User Guide
®
3615 Black and White Multifunction Printer