Xerox WorkCentre 3615 User Manual page 176

Troubleshooting
Symptom
The output is blank.
Streaks appear in the output.
The output has a mottled
appearance.
Ghosting appears in the printed
output.
®
176 Xerox WorkCentre
User Guide
Solutions
• Turn off the printer, then turn it on again.
• If the error persists, contact your Xerox representative.
• Replace the Smart Kit Drum Cartridge.
• Contact your Xerox representative.
• Verify that the paper is the correct size, type, and weight. If not, change
the paper settings.
• Ensure that the humidity in the room is within specifications. For details,
see Relative Humidity
• Adjust Transfer Unit to a lower value for the selected paper type. For
details, see
• Set the Adjust Transfer Unit setting to a higher value for the paper type.
For details, see
• Verify that the paper is the correct size, type, and weight. If not, change
the paper settings.
• Change the Paper Type settings in the print driver.
In the Printing Preferences of the print driver, on the Paper/Output tab,
change the Paper Type setting.
• Replace the Smart Kit Drum Cartridge.
• Adjust the fuser. For details, see
• Enable Ghost Control. For details, see
147.
®
3615 Black and White Multifunction Printer
on page 191.
Adjusting the Transfer Unit
Adjusting the Transfer Unit
Adjusting the Fuser
on page 141.
on page 141.
on page 142.
Enabling Ghost Control on page