Cleaning The Interior - Xerox WorkCentre 3615 User Manual

Cleaning the Feed Rollers on the Duplex Automatic Document Feeder
1. Open the duplex automatic document feeder top cover.
2. With a dry soft lint-free cloth or paper towel, wipe the feed rollers and the retard pad until they are
clean.
Note: If the duplex automatic document feeder feed rollers and retard pad get stained with toner or
debris, they can cause stains on the documents. To remove stains, use a soft lint-free cloth
dampened with a neutral detergent or water.

Cleaning the Interior

To prevent stains inside the printer that can deteriorate print quality, clean the interior of the printer
regularly. Clean the printer interior whenever you replace the drum cartridge.
After clearing paper jams or replacing a toner cartridge, inspect the inside of the printer before closing
the printer covers and doors.
• Remove any remaining pieces of paper or debris. For details, see
• Remove any dust or stains with a dry, clean cloth.
WARNING: Never touch a labeled area on or near the heat roller in the fuser. You can get burned. If
a sheet of paper is wrapped around the heat roller, do not try to remove it immediately. Switch off
the printer immediately and wait 40 minutes for the fuser to cool. Try to remove the jam after the
printer has cooled.
® ®
Xerox WorkCentre 3615 Black and White Multifunction Printer
Clearing Paper Jams on page 159.
User Guide
Maintenance
135