Manually Sending, Receiving, Or Polling Using Onhook - Xerox WorkCentre 3615 User Manual

Manually Sending, Receiving, or Polling Using
OnHook
OnHook temporarily allows you to send, receive, or poll faxes manually. OnHook also turns on the fax
modem speaker temporarily so you can hear the fax transmission sounds. This feature is helpful when
dialing internationally, or when using phone systems that require you to wait for a specific audio tone.

Manually Sending, Receiving, or Polling Using OnHook

1. At the printer control panel, press the Services Home button.
Touch Fax.
2.
3. Touch OnHook.
Touch Mode.
4.
5. Touch Manual Send, Manual Receive, or Manual Polling.
6. Enter a recipient fax number manually, enter a speed dial number, or select an individual from the
fax address book.
− To enter a fax number manually, use the keypad.
To insert a pause, press the Redial/Pause button (-). Press the Redial/Pause button multiple
−
times to add additional pauses.
To add a number from the fax address book, touch the address book icon, then touch Device
−
Address Book Individuals or Device Address Book Groups.
Select the individual or group from the list, then touch OK.
−
− To add numbers using Speed Dial, touch the orange telephone icon. Enter the speed dial
number that is associated with the contact in the address book, then touch OK.
Note: You can add one fax number, one phone number, one speed dial number, or select one
individual from the address book, manually, using OnHook.
Press the green Start button.
7.
® ®
Xerox WorkCentre 3615 Black and White Multifunction Printer
Faxing
127
User Guide