Connecting To A Wireless Network; Installing The Wireless Network Adapter - Xerox WorkCentre 3615 User Manual

Installation and Setup

Connecting to a Wireless Network

A wireless local area network (WLAN) provides the means to connect two or more devices in a LAN
without a physical connection. The printer can connect to a wireless LAN that includes a wireless router
or wireless access point. Before connecting the printer to a wireless network, the wireless router must be
configured with a service set identifier (SSID), a passphrase, and security protocols.
Note: Wireless networking is available only on printers with the optional Wireless Network Adapter
installed.

Installing the Wireless Network Adapter

The optional wireless network adapter plugs in to the back of the control board. After the adapter is
installed, and wireless networking is enabled and configured, the adapter is able to connect to a wireless
network.
To install the wireless network adapter:
1. Turn off the printer.
2. Remove the packaging from the wireless network adapter.
3. To attach the wireless network adapter to the printer, follow the installation sheet provided with the
wireless network adapter.
Note: Once the wireless network adapter is installed, remove it only as needed and after reading the
instructions for its removal.
®
36 Xerox WorkCentre
User Guide
®
3615 Black and White Multifunction Printer