Loading Paper In Trays 1-4 - Xerox WorkCentre 3615 User Manual

Loading Paper in Trays 1–4
1. To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,
then pull it out.
2. At the back of the paper tray, press the paper lift tray down until it locks.
3. Adjust the paper length and width guides as illustrated.
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
5. Load paper into the tray with the print side face up.
− Load hole punched paper with the holes to the left.
− For 1-sided printing, load letterhead face up with the top of the paper toward the back of the
tray.
− For 2-sided printing, load letterhead and pre-printed face down with the top edge facing you.
® ®
Xerox WorkCentre 3615 Black and White Multifunction Printer
Paper and Media
61
User Guide