Function List - Agilent Technologies B1500A User Manual

Table 2-1
Category
Initialize agb1500_init
Close agb1500_close
Miscellaneous agb1500_autoCal
agb1500_resetTimestamp
Channel setup agb1500_setSwitch
agb1500_abortMeasure
agb1500_zeroOutput
agb1500_recoverOutput
SMU channel agb1500_setFilter
setup
agb1500_setSerRes
agb1500_setAdcType
agb1500_setAdc
agb1500_asuLed
agb1500_asuPath
agb1500_asuRange
MFCMU agb1500_setCmuInteg
channel setup
agb1500_scuuLed
agb1500_scuuPath

Function List

Table 2-1 lists all the driver functions for the Agilent B1500. You will see a brief
description of the functions in the table.
B1500 Driver Functions
Function
Agilent B1500 VXIplug&play Driver User's Guide, Edition 3
Initializes the software connection with the B1500.
Closes the software connection with the B1500.
Sets the auto calibration mode
Clears the timer count (time stamp data).
Sets the channel output switch.
Aborts the present operation and subsequent command
execution.
Sets the channel output to 0 V.
Recovers the channel output that is set to 0 V by the
agb1500_zeroOutput function.
Sets the output filter.
Sets the series resistor.
Selects the ADC type, high speed or high resolution.
Sets the integration time or number of samples for ADC.
Enables/disables the status indicator (LED) of the ASU.
Controls the connection path of the ASU.
Enables/disables 1 pA operation of the ASU.
Sets the A/D converter of the MFCMU.
Enables/disables the status indicator (LED) of the SCUU.
Controls the connection path of the SCUU.
Driver Functions
Description
2-3