Ready 9520 Speaker Connections - NEC PowerMate VP75 User Manual

2-14 Setup and Operation
Connect the left speaker cable (with the dual plug) to the right speaker connector la-
2.
beled TO LEFT SPEAKER (see Figure Section 2-12).
3. Connect the right speaker cable (with the single plug) to the SPK OUT jack on the
sound board at the rear of the system unit.
Figure Section 2-12 Ready 9520 Speaker Connections
Connect the 6-volt AC adapter as follows.
1. Remove any installed batteries from the speakers.
2. Plug the AC adapter into the DC 6V jack on the back of the left speaker (see Figure
Section 2-12).
3. Plug the other end of the AC adapter into a properly grounded wall outlet.