Power Menu - NEC PowerMate VP75 User Manual

Feature
Set User Password
Password on boot
Diskette access
Fixed disk boot
sector
System backup
reminder
Virus check
reminder

Power Menu

Selecting "Power" from the menu bar displays a screen with the power management
parameters. Use the Power menu to specify the settings for Power Management. The
parameters are described in the following table.
A power-management system reduces the amount of energy used after specified periods of inac-
tivity. The Power menu supports a Full On state, a Standby state with partial power
reduction, and a Suspend state with full power reduction.
Table Section 2-9 System Security Options
Options
Up to seven
alphanumeric characters
Disabled (default)
Enabled
User (default)
Supervisor
Normal (default)
Write Protected
Disabled (default)
Daily
Weekly
Monthly
Setup and Operation
Description
Enter
Pressing displays the dialog box for
entering the user password. This password gives
RESTRICTED access to Setup menus. Requires
prior setting of Supervisor password.
Enabled requires a password on boot (cold boot
only, no password required for warm boot).
Requires the prior setting of the Supervisor and/or
User password.
If disabled, password(s) are required for entering
Setup but are not required for booting.
If Supervisor password is set and this option is
disabled, the BIOS boots without asking for a
password.
Supervisor setting restricts use of diskette drives to
supervisor. Requires setting the Supervisor
password.
Write protected helps prevent viruses. When write
protected, operating systems (and viruses and
application programs) which attempt to modify the
boot sector will not be able to do so.
When a schedule is specified, displays a message
during bootup asking (Y/N) if the system has been
backed up or scanned for viruses.
Message returns on each boot until "Y" is
responded.
Daily displays the message on the first boot of the
day, weekly on the first boot after Sunday, and
monthly on the first boot of the month.
2-27