Expansion Board Removal; Expansion Slot Screw - NEC PowerMate VP75 User Manual

6-6 Minitower Repair

Expansion Board Removal

Remove the sound board (multimedia configurations), network board (network configura-
tions), or any other installed expansion board(s) per the following steps.
1. Remove the top cover and bottom access cover as previously described.
2. Disconnect any cables leading from the expansion board(s). The sound board has
an audio cable and signal cable attached.
Remove the screw from the expansion slot bracket (see Figure Section 6-4).
3.
Remove the expansion board.
4.
Figure Section 6-4 Expansion Slot Screw