5-14
Desktop Repair
Optional 5 1/4-Inch Device Removal
Remove an optional 5 1/4-inch device from the 5 1/4-inch device cage per Figure Section 5-13,
and the following steps.
1.
Remove the top cover, front panel, and 3 1/2-inch drive bracket as previously
described.
Unplug all signal and power cables from the device(s) in the 5 1/4-inch device cage
2.
(see Figure Section 5-13), including the audio cable connected to the CD-ROM (if in-
stalled).
3.
Remove the four device screws, two from each side of the 5 1/4-inch device cage (see
Figure Section 5-13).
Remove the device from the 5 1/4-inch device cage.
4.
NOTE: When reinstalling the 5 1/4-inch device,
note that all power cables are keyed to fit only in the
correct position. The red edge of the diskette drive
signal cable is positioned as shown.
2 of 4
Device Screws
Figure Section 5-13 5 1/4-Inch Device Screws
Power Cable
Signal Cable
Audio Cable
Device Cage