Operation; Input Selection And Controls; Display Symbols - Ikegami MLM-1581CH Instruction Manual

5. Operation

5-1. Input Selection and Controls

There are 6 keys on the front panel. Those are, (from left to right), Power, Input
select key and a Menu/Set key, Plus(+) key and Minus (-) key and a front power
switch and power indication LED on far right.
POWER :
POWER ON/OFF
INPUT SELECT :
Used to select input signals.
MENU/SET :
This is for a direct selection of Colour Pre-set, and when it is pressed for a long
period, it works to display the OSD Menu.
Minus (-) Key :
Normally for Brightness control and it works as a direct set control for (-), when
selecting setup menu selection.
Plus (+) Key :
Normally for Contrast control and it works as a direct set control for (+),when
selecting setup menu.
Note. INPUT SELECT: Used to select input signals. The signals VBS, Y/C,
COMPONENT, PC and DVI are selected in this order. (Each press en-
ables to switch to the following type of signal.)

5-2. Display Symbols

VIDEO
S-VIDEO
COMPONENT :
PC
DVI
No Signal
: "VIDEO"
: "S-VIDEO"
"COMPONENT"
: "PC"
: "DVI"
: "NO SIGNAL"
7