Operation; Key Operation; Display With A Signal Being Selected - Ikegami MLM-1912C Instruction Manual

5. Operation

5.1 Key Operation

There are seven front keys as shown below.
Power Standby SW
Indicator
The keys have the following functions.
Standby SW
INPUT1
INPUT2
MENU
CONT/BRT/EXIT : Used to put the contrast, brightness and other settings in memory
If no operation is made within the OSD User Time Out setting, the pre-adjusted settings
are resumed and the OSD disappears.

5.2 Display with a Signal Being Selected

5.2.1 Input Signal Screen Display
5.2.2 Input Display
SDI : SDI
COMPONENT : COMP
PC : PC
DVI : DVI
VIDEO : VIDEO
S-VIDEO : S-VIDEO
INPUT1 INPUT2
: Used to turn on and off the power.
: Switching of the input signal set to IN1
: Switching of the input signal set to IN2
: Used to display the menu.
: Used to select the setting menu, to make adjustments.
: Used to select the setting menu, to make adjustments.
and to exit.
IN1: "Input" "Signal"
Signal input specified to IN1
When no input signal is set: IN2 :
Fan indication
MENU
Abnormality: Stop using the unit and
contact the sales agent.
8
CONT/BRT/EXIT