About Input Signals; Functions - Ikegami MLM-1581CH Instruction Manual

• Other Useful Features
For ease of operation and for versatility, Ikegami medical LCD monitors can pro-
vide a lot of digital interface inputs and outputs, such as HD SDI, DVI as an option,
on top of the standard composite, Y/C and component signal provision.
The user file menu comes equipped as standard with non-volatile memory for 5
different file settings on each type of input.
A screen protection panel and water-proof front control panel are available as an
option.

2-2. About Input Signals

NTSC/PAL Video (BNC or S terminal):
This is for NTSC or PAL composite signal and Y/C component signal
The unit is provided with automatic change-over for the input signals.
RGB or Component Signal (BNC connector):
For NTSC or PAL, and 480/60p, 576/50p, HD 1080i and 720p input.
Analog RGB (HD-15 input), or DVI-D (DVI-D) input:
This input is to display VGA, SVGA, XGA and SXGA from Computer.
External Sync Signal Input :
This is to synchronize with camera or signal generator.

2-3. Functions

Colour temperature Change-over:
Selection of colour temperature is possible in 6500K, 9300K or any desired
Colour temperature setup by the user setting.
Gamma Setting :
Gamma can be set at any desired position between 1.6 to 2.8 by 0.1 increments.
Aspect Ratio Change :
Aspect Ratio of the picture on a screen can be changed in 4 by 3 or 16 by 9.
User Setup Memory Change-over :
Five different settings for picture setup parameters such as brightness or colour ren-
derings on each input can be memorized and can be called when it becomes necessary.
3