Input Signal Connection; Ntsc/Pal Analog Video; Ntsc/Pal Analog S-Video; Rgb Or Y.pb.pr. Analog Signals (Bnc Connector) - Ikegami MLM-1581CH Instruction Manual

4. Input Signal Connection

4-1. NTSC/PAL Analog Video

4-2. NTSC/PAL Analog S-Video

4-3. RGB or Y.Pb.Pr. Analog Signals (BNC Connector)

For G/Y signal : Connect to a component G/Y input.
For B/Pb.signal: Connect to a component B/Pb.input.
For R/Pr.signal : Connect to a component R/Pr. input.
For Sync signal: Connect to a component Sync input.

4-4. PC Analog signal

4-5. PC Digital signal

4-6. Remote Connection

Remote control is possible with a remote control signal feed. The unit provides
a 9 pin D-sub connector on a rear panel. The connection is simple, but please
note that No.7 and No.8 pins of an input connector should be bridged.
And please consult your dealer or supplier for details.
LCD Monitor Rear Side/
D-SUB 9 pins Connector
: Connect to the Video input.
: Connect to the S-Video input.
: Connect to a PC input of D-Sub 15 pin connector.
: Connect to a DVI input.
:
* The PC side looping connects 7 pins and 8 pins.
6
:
The Outside PC/D-SUB
9 pins Connector