Related Manuals for Ikegami MLW-2622C
Summary of Contents for Ikegami MLW-2622C
-
Page 1: Instruction Manual
INSTRUCTION MANUAL Full HD 26-inch Multi-format LCD Color Monitor MLW-2622C Model Ikegami Tsushinki Co., Ltd. - Page 2 Thank you for choosing this Ikegami HD Monitor. Please read this Instruction manual carefully to keep your Ikegami products at peak performance for a longer service period. All Ikegami products are designed and manufactured with utmost care and craftsmanship to provide long life and high quality performance, if it is properly used and maintained as outlined in this manual.
- Page 3 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN SA 1965 SA 1966 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead inside a triangle is intended to warn the user that parts inside the product are dangerous and many cause electrical hazards.
-
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. General 1) Read all instructions provided. 2) Save these instructions for future use. 3) Follow all warnings and instructions marked on the monitor equipment. 4) Never insert objects of any kind into this monitor through cabinet slots as they may come in contact with dangerous voltage points or short out parts, resulting in fire or electrical hazards, Never spill liquid of any kind on the monitor. -
Page 5: Operating Precautions
3) Upon completion of any service or repairs to this monitor, ask the service technician to perform routine safety checks to determine that the Color LCD Display is in safe operating condition. 4) For repair service, contact Ikegami’s authorized sales representative or Ikegami service desk directly. OPERATING PRECAUTIONS 1) Never let this unit fall or subject it to strong shock. -
Page 6: Table Of Contents
Contents 1. Precautions ......................1-3 2. General Description ....................4-5 2.1 Features ......................4 2.2 About Input Signals ..................4 2.3 Functions ....................... 5 3. Names of Parts ...................... 6 3.1 Names of Parts and Their Functions ............6 4. Input Signal Connection ..................7 4.1 NTSC/PAL Analog Video ................ -
Page 7: Precautions
1. Precautions • When you open the cardboard box of the LCD monitor, please check that the indicated accessories and cables are present. It is recommended not to dispose of the packaging materials and to store them for later use if it becomes necessary to transport again for after-sales service, or maintenance purposes. - Page 8 1. Precautions Warning on power connection. The United States Canada Continental Europe NEMA 5-15P NEMA 5-15P CEE7 Plug Type HOSPITAL GRADE HOSPITAL GRADE EURO Rated Voltage & Current 10A/125V 10A/125V 10A/250V Safety Approval Plug Configuration Power Cord Type SJT Type SJT H05VV-F Use a proper power cord for your local power supply.
- Page 9 1. Precautions Maintenance • Clean the cabinet, panel and controls with a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent, such as benzene. • Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as a ball-point pen or screwdriver.
-
Page 10: General Description
The medical-use monitor conforms to US UL60601-1, Canadian CSA22.2 No. 601.1 (cUL) and European EN60601-1 safety standards too. ● MLW-2622C is a monitor intended for use in a medical environment to display pictures from cameras or other system. 2.2 About Input Signals ●... -
Page 11: Functions
2. General Description 2.3 Functions ● Color temperature switching function The color temperatures can be chosen from 6500K, 9300K and user settings to select a color rendering to your taste. ● Gamma level switching function The gamma level can be selected, compatible with DICOM14, from 1.8 to 2.6 (in 0.2 increments), ●... -
Page 12: Names Of Parts
3. Names of Parts 3.1 Names of Parts and Their Functions Front Power indicator Standby power switch Input 1 Input 2 MENU Contrast/ Brightness/ Exit Back SDI input SDI output Video input/output S-Video input/output Y/G input/output Pb/B input/output Pr/R input/output Sync input/output PC (RGB) 1 input DVI-D1 input... -
Page 13: Input Signal Connection
4. Input Signal Connection Connect the input signals in the following way. 4.1 NTSC/PAL Analog Video : Connected to the Video input. 4.2 NTSC/PAL Analog S-Video: : Connected to the S-Video input. 4.3 RGB or YPbPr Analog signals (BNC connector) G/Y: Connected to Component G/Y input. -
Page 14: Operation
5. Operation 5.1 Key Operation There are seven front keys as shown below. Power Standby SW INPUT1 INPUT2 MENU CONT/BRT/EXIT Indicator The keys have the following functions. Standby SW : Used to turn on and off the power. INPUT1 : Switching of the input signal set to IN1 INPUT2 : Switching of the input signal set to IN2 MENU... -
Page 15: Settings And Key Operation
5. Operation 5.2.3 Signal Name Display SD Video line : 480i, 575i HD Video line : 7 2 0 P / 5 0 , 7 2 0 P / 6 0 , 1 0 8 0 i / 5 0 , 1 0 8 0 i / 6 0 , 1 0 8 0 P / 5 0 , 1 0 8 0 P / 6 0 (59.94 Hz is expressed as 60 Hz.) PC line : VGA, SVGA, XGA, SXGA, WUXGA, 480i, 575i, 720P/50, 720P/60,... -
Page 16: Status Screen
5. Operation 5.4 Status Screen This screen is used to display the current input signal information and the monitor settings. Screen display Status setting screen description The selected input signal and the setting status are displayed. • Signal Set.: Used to display the format setting of each input signal; RGB or YPbPr. -
Page 17: User Setting Screen
• Logo: It is possible to select the logo display when the power is turned on: OFF: No logo is displayed ON: The Ikegami logo is displayed. • Language: This switches the language between English and Chinese. • Reverse: This is a function for inverting the screen display: OFF: Normal display;... -
Page 18: Display Setting Screen
5. Operation 5.6 Display Setting Screen This screen is used to make the input signal display aspect ratio, horizontal and vertical display positions and sizes, and other settings. Screen display Display setting screen description • Aspect: Used to switch the video signal aspect ratio from Normal, Full and Clear. -
Page 19: Image Setting Screen
5. Operation • Phase: Adjusts the sampling point for analog signals other than VIDEO/S- VIDEO and DVI signals. Make this adjustment if the rising edge of characters and the like look blurry or fine patterns suffer from noises. • AUTO: Automatically adjusts the display position and the size, the number of sampled dots, and the sampling point, depending on the input signal. -
Page 20: Color Adjustment Screen
5. Operation • Video Setup: Used to select the setup level of composite and Y/C signals. Offset set at 0%. Mid: Offset set at 3%. Hi: Offset set at 7.5%. • Filter Select: Used to select a decoder filter. This function works with the NTSC system only. 3D: Three-dimensional filter, Comb: Comb filter, Trap: Trap The standard setting is 3D. -
Page 21: Memory Select Screen
5. Operation • Gamma Control: Used to adjust the gamma level from 1.8 to 2.6 in 0.2 increments. D14: Gamma level at DICOM Part 14. User: Selectable from the user-preset gamma levels (factory option setting). • Signal Set.: Used to set the format of each input signal. RGB or YPbPr can be set. -
Page 22: Applicable Signals
6. Applicable Signals 6.1 Video Signals *Only G-Sync supported 6.2 D-SUB/DVI-D Computer Signals... -
Page 23: Troubleshooting
7. Troubleshooting No image appears on the monitor screen. • Check to see if the AC power cord is tightly plugged in. • Check to see if the unit’s power switch is turned on. • Check the input signal. • Check to see if the input is selected as specified. •... - Page 24 7. Troubleshooting The screen size is wrong. • Check to see if the signal is listed in the applicable signals chart described under section 6. • On the Display Setting screen, set the AUTO. If the desired setting cannot be obtained, adjust H.Position, V.Position, H.Size, V.Size, and Clock.
-
Page 25: Specifications
Protection against electric shock Class I Degree of safety in the presence of Not suitable for use in the presence of flammable anesthetics or oxygen flammable anesthetics or oxygen. Mode of operation Continuous Manufacturers Ikegami Tsushinki Co., Ltd. The SDI is optional. -
Page 26: Specifications
8. Specifications Appearance view <without stand type> <with optional stand type> Specifications and design are subject to change for product improvements without notice. -
Page 27: Use The Stand
9. Use the stand • Clean work area. To protect monitor screen : wipe off work area and place monitor (Screen-side down) on a soft cloth or towel before proceeding with installation. top of monitor screen • Attach stand to monitor. Start screws as far as possible by hand, the tighten with screwdriver. - Page 28 Ikegami Tsushinki Co., Ltd. 5-6-16, Ikegami, Ohta-ku, Tokyo, Japan 146-8567 Phone:(03)5700-1111 Fax:(03)5700-1137 Ikegami Electronics (U.S.A.), Inc. 37 Brook Avenue, Maywood, New Jersey 07607 Phone:(201)368-9171, Fax:(201)569-1626 Ikegami Electronics (Europe) GmbH Ikegami Strasse 1, D-41460 Neuss, Germany Phone:(02131)123-0, Fax:(02131)102820 Ikegami Tsushinki Co., Ltd.