Table of Contents
Advertisement
•
Video/S-Video Setup :
This is to select a video setup level for composite video, or For Y/C signal
input.
0 means the offset level is 0%.
Mid means the offset level is 3%.
Hi means the offset level is 7.5 %.
•
Back Light:
This Display Power Management System is to save power consumption to
deactivate the Back Light when there is no input signal or no manipulation
after more than 30 seconds.
Pressing the power ON/OFF, or feed input signals, or key manipulation
resumes power.
•
H. Frequency:
The horizontal frequency of signal currently being fed is displayed.
•
V. Frequency:
The vertical frequency of signal currently being fed is displayed.
•
SAVE :
This causes all setting changes to be saved, without pressing Save the set-
ting goes back to the condition before setup manipulation.
11
Advertisement
Table of Contents
