Page 4
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Page 18
⑭ ⑮ ⑯ ⑰ ⑱ ⑲ ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮ ⑯ ⑰ ⑱ ⑲ − +...
Page 19
D-SUB 9 pin connector on LCD Monitor back External PC/D-SUB 9 pin Connector 2.TXD 2.RXD 3.RXD 3.TXD 5.GND 5.GND 7.RTS 8.CTS Do not connect anything to pins 1, 4, 6, Note: At the PC, Pins 7 and 8 7, 8, or 9 on the monitor side (or else, a must be loop-connected.
Page 24
fi fi ・ ・ ・ Aspect Full 1 : 1 NTSC/PAL 1600×1080 display 1920×1080 display 720×540 display Black zones on Cut off at top both sides and bottom 1600x1080 display 1920x1080 display 1920x1080 display ・ ・...