Ikegami MLM-1581CH Instruction Manual page 29

Vertical stripes are visible :
• Check and adjust the clock signal or the phase with the Display Control Setup
Screen.
Too much Noise :
• Check and adjust the clock signal or the phase with the Display control Setup
Screen.
Operation Key does not work :
• Is the front key lock function ON? Check with User Service Setup.
To release a lock, turn power ON while pressing + key and - key on the front panel
at the same time.
Even though the condition is un-changed, make a Factory Rest with the Reset
Screen, but please note that all the User Settings return to factory default.
Other :
• When you switch input signals, the screen image may be wobbling, but this is not
a malfunction. Sometimes it may happen.
23