Image Setting Screen - Ikegami MLM-1581CH Instruction Manual

• Phase :
• SAVE :
Note :Variable range of H.Position and V.Position when PAL or SDI signals are fed ;
Also please note that the screen size can not be changed, when the clear mode is
on.
H.Position
PAL -17 to + 17
SDI -50 to + 50

5-7. Image Setting Screen

This is to adjust composite and Y/C Video Signals.
Controls for brightness and Contrast are possible with all kinds of input signals.
Screen Display
• Contrast:
• Brightness:
• Hue:
This is to adjust a sampling point of an input signal and may be
necessary to make it clear when edges are not clear when you
feed signals with characters or letters, or need to display fine
charts or drawings.
This works only with a component or PC.
This is to memorize the selected parameters. If you do not SAVE
the changes,the setting goes back to the conditions active prior
to making changes.
V.Position
-16 to +16
-10 to +10
This is to adjust the contrast, that is to control white level of
signals. (+)makes it brighter and (-) makes it darker.
This is to adjust the brightness, that is to control black level
of signals, (+) make it brighter, and (-) makes it darker.
This is to adjust colour phase, Hue.
13