Table of Contents
Advertisement
•
Chroma:
This is to control the density of colour. (+) makes it stronger
and(-) makes it paler.
•
Blue only:
This turns the display to Blue colour only. This facilitates
adjustments for contrast, brightness, chroma, hue. But this
works only with an NTSC composite video input.
•
Filter select : This is to select filter of decoder. (Only for NTSC mode).
There are two kinds, 2D for 2 dimensional filter and 3D for 3
dimensional filter. Note that the factory default is 3D.
•
Edge enhancer:
This is to control a sharpness of the picture.
(+) make it stronger and (-) makes it weaker.
•
Back Light:
This is to set the level of back lighting of LCD panel.
0 means the lowest back light level and 255 is the highest.
•
IP mode:
This is to select a conversion mode of interlaced and progres-
sive scanning.
The Still mode is effective for still pictures and it is recom-
mended to use this Still mode for non-moving, still images.
The Motion mode is useful for moving picture and it is rec-
ommended to use this motion mode for moving pictures, es-
pecially fast motion.
•
SAVE:
This is to memorize the selected parameters. If you do not
SAVE the changes,the setting goes back to the conditions
active prior to making changes.
14
Advertisement
Table of Contents
