Installing A Cd Or Diskette Drive - Gateway 9210 User Manual

If you are connecting two PATA drives to the cable, connect the middle cable
■
connector to the slave drive and connect the end cable connector to the master
(boot) drive.
■ You may need to configure the drives you install using the BIOS Setup utility. Press
F2 at startup to open the BIOS Setup utility.

Installing a CD or diskette drive

To install a CD or diskette drive:
1
Follow the instructions in
2
Follow the instructions in
"Preventing static electricity discharge" on page
"Opening the server case" on page
www.gateway.com
29.
30.
33