Installing a PCI expansion card
A PCI expansion card (sometimes called an add-in card) is a card used in the server to add
functionality to the system. Use the following procedure to replace, add, or reseat an
expansion card.
To replace, add, or reseat a PCI expansion card:
1
Follow the instructions in
2
Follow the instructions in
3
If you are replacing a card, disconnect any cables that are attached to the old card.
4
Remove the thumbscrew that secures the expansion card retention cover to the server
case.
Caution
"Preventing static electricity discharge" on page
"Opening the server case" on page
Do not touch the contacts on the bottom part of the PCI
card. Touching the contacts can cause electrostatic
damage to the card.
www.gateway.com
29.
30.
Thumbscrew
43