Preventing Static Electricity Discharge - Gateway 9210 User Manual

Preventing static electricity discharge

The components inside your server are extremely sensitive to static electricity, also known
as electrostatic discharge (ESD).
Warning
Caution
Before working with server components, follow these guidelines:
■
Turn off the server, then unplug the power cords and all other cables.
■
Press the power button to drain any residual power from the server.
■ Wear a grounding wrist strap (available at most electronics stores) and attach it to a
bare metal part of the server. You can also touch a bare metal surface on the back of
the server with your finger.
Warning
■
Avoid static-causing surfaces such as carpeted floors, plastic, and packing foam.
■ Avoid working on the server when your work area is extremely humid.
■ Remove components from their antistatic bags only when you are ready to use them.
Do not lay components on the outside of antistatic bags because only the inside of
the bags provide electrostatic protection.
■
Always hold expansion cards by their edges or their metal mounting brackets. Avoid
touching the edge connectors and components on the cards. Never slide expansion
cards or components over any surface.
To avoid exposure to dangerous electrical voltages and
moving parts, turn off your server and unplug the power
cord and modem cable before opening the server case.
ESD can permanently damage electrostatic
discharge-sensitive components in the server. Prevent
ESD damage by following ESD guidelines every time you
open the server case.
To prevent risk of electric shock, do not insert any object
into the vent holes of the power supply.
www.gateway.com 29